Chilli Penguin - The Hungry Penguin
This stove does it all, it keeps you warm, cooks your dinner and boils your kettle for a coffee afterwards. It’s ideal for canal boats, studios and homes where you don’t want to be dependant on mains gas and electricity.
This is the original stove that began the business. The design has evolved over the years, but the fire box and oven remain almost identical. Our very first penguin will always be a bit special for us!
If you are trying to reduce your carbon footprint or your fuel bill, being able to heat and cook from the same fuel load makes a lot of sense.
If you want that smug feeling of warm toes and a hot pasty, we're with you all the way! It is a different experience to cooking with flick-a-switch power... but you’re off grid and the stoves on anyway!
OPTIONS
The Hungry Penguin is also available with an extra height oven, called the Hungry Penguin (Tall order).This increases the internal oven height to a total of 200 mm.
| Nominal Output |
Wood 4.7 kW |
Smokeless Fuel 4.8 kW |
| Efficiency | 81.2 % | 87 % |
| Dimensions | ||
| Hungry Penguin | ||
| Width 380mm | Depth 367mm | Height 683mm |
| Internal Oven Dimensionn | ||
| Width 250mm | Depth 220mm | Height 100mm |
| Multi-fuel | yes | |
| Colours available | yes | |
| Optional Direct Air Kit | yes (factory-fitted) | |
| Optional plinth | yes (pre-order) | |
| Approved for use in smoke control zones | yes | |
| Log length × diameter | length 270mm | diam 100mm |
| Flue Collar Diameter | 127mm | |
| Flue size required | min 125mm | |
| Ecodesign measures | ||
| Particulates @ 13% O2 | 33 mg/m³ | 12 mg/m³ |
| CO content @13% O2 | 0.10 % | 0.06 % |
| NOx mg/m³ | 135 mg/m³ | 119 mg/m³ |
| CxHy mg /m³ | 96 mg/m³ | 37mg/m³ |
| Top Exit | standard | |
| Rear Exit | fit collar to rear | |
| option for rear flue can be factory fitted if selected at point of order | ||
| Distance to combustibles *+ | ||
| side 550mm | rear 350 mm | above 450mm |
| Distance to combustibles with insulated flue fitted to stove top * | ||
| side 550mm | rear 250mm | above 450mm |
| Distance to non combustibles | ||
| side 100mm | rear 50mm | above 150mm |
| Hearth type | with no base heat shield/plinth | constructional |
| Hearth Type | with base heat shield/plinth | 12mm |
| * these are the minimum distances, be aware that there are other considerations eg. access for sweeping, height of kettle etc | ||
|
+ if single wall ie. non insulated flue is used then the distance to combustibles at the rear is equal to 3 x flue diameter
|
||
